Netspa UFC IceBath Duo kit with chiller

Netspa UFC IceBath Duo: inflatable ice bath with Drop-Stitch technology

The Netspa UFC IceBath Duo is an inflatable ice bath designed for cold-water immersion routines in wellness spaces, training facilities or at home. Its Drop-Stitch technology structure combines high-pressure inflatable walls and base to provide a firm surface once installed and filled.

This version is supplied as a kit with chiller and features water inlet and outlet connections for linking the cooling system through two threaded fittings. It can also be used with ice cubes. The indicated temperature range for the bath is 3 to 37°C.

Compact single-person design

With external dimensions of 170 × 92 × 67 cm, the UFC IceBath Duo is designed for one adult. Its internal dimensions are 140 × 62 × 67 cm and it holds between 290 and 350 litres of water, while observing the 30 to 38 cm fill-level markings.

Side handles make the empty bath easier to handle and provide support when getting out. The protective cover fastens with four locking safety buckles, helping to keep the water protected when the unit is not in use.

• Model Netspa UFC IceBath Duo
• Reference SP-UFC301-CK5
• Capacity 1 adult
• External dimensions 170 × 92 × 67 cm
• Internal dimensions 140 × 62 × 67 cm
• Water capacity 290–350 L
• Indicated temperature range 3–37°C
• Water level minimum 30 cm / maximum 38 cm
• Material Drop-Stitch
• Maximum authorised load 500 kg

Setup, inflation and connections

The bath must be installed on a clean, flat, level and non-slip surface. For outdoor use, it should be positioned in the shade or under cover, on a base capable of supporting the indicated load. Setup is carried out with the supplied manual pump and can be completed in under five minutes.

The recommended pressure is 5 PSI for the walls and 8 PSI for the floor. Do not exceed the indicated maximum pressure of 8 PSI. Once inflated, fit the filter cartridge and holder to the internal suction connection, then connect the hoses to the cooling system when used.

• Recommended wall pressure 5 PSI
• Floor pressure 8 PSI
• Water connection inlet and outlet for cooling system
• Connection hoses 2 units, 250 mm, Ø 32 mm
• Drainage internal and external drain plugs
• Cooling options compatible with a chiller and ice cubes

Included accessories

The kit includes the components required for inflating, protecting and carrying out basic maintenance of the bath. The two-handled carry bag allows the unit to be transported when empty.

• Inflatable bath Netspa UFC IceBath Duo
• Cover protective cover with safety buckles
• Inflation manual pump with pressure gauge
• Filtration filter and filter holder
• Connections 2 hoses and 2 water inlet and outlet plugs
• Transport two-handled carry bag
• Maintenance repair kit and 2 drain plugs
• Documentation installation and user manual

Water maintenance and storage

To keep the equipment in suitable condition, maintain treated water and check its parameters before each use or at least once a week. The indicated pH should be kept between 7 and 7.4. Clean the filter cartridge every one to two weeks and replace it every one to two months, depending on frequency of use.

It is recommended to replace the water every 15 to 30 days. After draining the bath, clean it with water, liquid soap and a sponge, then rinse and dry it completely before storage. To store the unit, disconnect the cooling system, remove the filter, allow the bath to dry for 24 hours, deflate it and fold it in a dry area with a stable temperature.

Safe use guidelines

Netspa is a Poolstar group brand. This product is covered by a 2-year warranty against material and manufacturing defects, subject to the manufacturer’s terms and conditions.