Netspa Järvi Drop-Stitch inflatable ice bath

Netspa Järvi: inflatable ice bath with Drop-Stitch technology

The Netspa Järvi is an inflatable ice bath designed to create a cold-water immersion space at home, in training areas or wellness spaces. Its Drop-Stitch construction combines a lightweight, portable format when deflated with a structure designed to achieve good rigidity when inflated to the recommended pressure.

Its elongated design has external dimensions of 170 × 92 × 67 cm and features ergonomic handles to make transport easier when empty and to provide support when getting out of the bath. The thermal cover with safety buckles helps keep the water covered after each use.

Two ways to cool the water

Järvi can be used with ice cubes or integrated with a compatible chiller. It has water inlet and outlet connections, together with a Ø 32 mm connection kit and hoses for connection to an external cooling system. When used with a chiller, the water can be cooled down to 2 °C.

During use, the water level must remain between the minimum and maximum marks. The specified filling volume is 290 to 350 litres, with a water level between 300 and 380 mm.

Structure, connections and included accessories

The bath features inflation valves, hydraulic connections, drain plugs and a filter element holder. The base and structure are inflated independently: the recommended wall pressure is 5 PSI, while the maximum base inflation pressure is 8 PSI.

• Construction technology Drop-Stitch
• External dimensions 1700 × 920 × 670 mm
• Internal dimensions 1400 × 620 × 670 mm
• Water volume 290–350 L
• Minimum water level 300 mm
• Maximum water level 380 mm
• Specified temperature range 3–37 °C
• Recommended wall pressure 5 PSI
• Maximum base pressure 8 PSI
• Maximum permitted load 500 kg
• Cooling connections Water inlet and outlet; D32 mm connection kit
• Included connection hoses 2 hoses, 250 mm long and Ø 32 mm
• Cover Thermal/protective cover with 4 locking safety buckles

What's included

The Netspa Järvi is supplied with the items required for assembly, inflation and routine maintenance.

• Bath Järvi inflatable bath
• Cover Thermal/protective cover with safety buckles
• Inflation Manual air pump with pressure gauge
• Connection 2 connection hoses, water inlet and outlet plugs, and D32 mm connection kit
• Filtration Filter, filter holder and antibacterial cartridge
• Transport Carry bag with two handles
• Maintenance Two drain plugs and repair kit
• Documentation Installation and user manual

Installation and maintenance

Install the bath on a flat, level, clean and non-slip surface. For outdoor use, place it in a shaded or sun-protected area on a base capable of supporting 500 kg. For indoor installations, position it near a drainage system to make emptying easier and to manage condensation when using a cooling system.

To maintain water quality, clean the filter cartridge every 1 to 2 weeks and replace it every 1 to 2 months, or earlier if it remains dirty or becomes discoloured. Change the water every 15 to 30 days and maintain a pH level between 7 and 7.4. A water test kit is not included.

Responsible use

Use is restricted to persons aged 16 and over. It must not be used for diving or left unattended while filling. After each use, fit the cover and secure the safety buckles. For ice baths, it is recommended to begin with sessions of 5 to 10 minutes and limit immersion to 10–15 minutes.

Warranty

Poolstar provides a 2-year warranty for the original owner against defects in materials and workmanship, subject to its warranty terms and conditions.