Electric Treatment Table Classic 532 – For professional physiotherapy
CE Marking
Five-section medical device with dual motorisation, designed for advanced clinical physiotherapy, rehabilitation and manual therapy treatments. Equipped with height control, electric tilt and independent headrest and footrest adjustment by gas struts, it gives the professional full control over patient positioning.
Manufactured in accordance with Regulation (EU) 2017/745 on medical devices (Class I) and with CE Marking, it ensures clinical safety, stability and reliability.
Main features
- Five-section electric medical treatment table with reinforced frame.
- Electrically adjustable height from 47 to 97 cm via perimeter bar.
- Articulated headrest with gas strut, tilt from -30° to +70°, and manually adjustable armrests.
- Articulated footrest with gas strut, tilt from 0° to +80°.
- Dual electric system with two 6000 N motors: one for height and one for Trendelenburg/Kyphosis movement (+20°) controlled by foot pedal.
- Medical PVC upholstery, flame-retardant and easy to disinfect.
- Retractable castors with brake for safe and stable movement.
- Anatomical face hole and couch roll holder included.
- Manufacturer’s warranty: 5 years.
Use in the treatment room and treatment types
Especially suitable for:
- Advanced physiotherapy, functional rehabilitation and osteopathy.
- Trauma, post-surgical and neuromuscular treatments.
- Massage therapy, lymphatic drainage and combined therapies with medical equipment (ultrasound, electrostimulation, medical radiofrequency, etc.).
- Biomechanical assessments and joint mobility tests.
The upper section allows precise adjustment of the head, trunk and lower limbs, ensuring an anatomically correct and ergonomic position for both patient and therapist.
The Trendelenburg/Kyphosis mode facilitates postural drainage, assisted mobilisation and re-education treatments.
Control and adjustments
The dual-motor system allows full control:
- Height adjustment via perimeter bar accessible from any side.
- Overall table tilt by electric foot pedal for Trendelenburg (+20°) or Kyphosis positions.
- Headrest and footrest adjustment by gas struts for smooth and safe inclination.
- Independent armrests, manually adjustable according to the type of therapy.
The motorised system design ensures precise and quiet movements, complying with EN 60601-1 medical electrical safety standards.
Materials and finish
Metal frame with epoxy paint resistant to wear and moisture.
Medical PVC upholstery, flame-retardant, washable and compatible with disinfectants for clinical use.
5.5 cm foam padding with a density of 40 kg/m³, providing firm support and prolonged comfort.
Available in several colour finishes to suit the clinical environment.
Maintenance and cleaning
- Disconnect the treatment table before cleaning or maintenance.
- Periodically check connections, gas struts and wiring.
- Clean with a soft cloth and neutral detergent; apply a disinfectant compatible with medical PVC.
- Avoid abrasive products or spraying directly onto the upholstery.
- Keep moving parts clean and dry.
Technical specifications and electrical data
- Model Classic 532
- Dimensions 201 x 68 cm
- Adjustable height 47 to 97 cm
- Sections 5 sections
- Headrest -30° / +70°
- Footrest 0° / +80°
- Trendelenburg / Kyphosis mode +20°
- Motor 2 electric motors of 6000 N
- Voltage AC 220–240 V / 50–60 Hz
- Output DC 24 V / 5.5 A / 132 W
- Foam 5.5 cm – density 40 kg/m³
- Upholstery Flame-retardant medical PVC
- Castors 4 retractable with brake
- Weight 90 kg
- Maximum load 250 kg
- Duty cycle 2 min ON / 18 min OFF
- Certification Regulation (EU) 2017/745 – Class I
- UDI-DI 06976904610031
Certifications and compliance
Complies with European medical safety standards:
- EN 60601-1:2006/A2:2021 – Basic safety and essential performance.
- EN 60601-1-6:2010/A2:2021 – Usability and medical control.
- EN 60601-1-2:2015 – Electromagnetic compatibility.
CE Marking – Class I medical device in accordance with Regulation (EU) 2017/745.
The product is delivered kerbside. If you require a porter service to move it to an upper floor or inside your commercial premises, please let us know so that we can prepare a specific quotation.