NetSpa OCTOPUS semi-rigid portable spa for 6 people with furniture kit

NetSpa OCTOPUS semi-rigid portable spa for 6 people

The NetSpa OCTOPUS is a semi-rigid portable spa designed for domestic outdoor use. Its octagonal design accommodates 4+2 people, with an external diameter of 193 cm and a height of 73 cm. This configuration includes the 5-piece furniture kit, designed to organise the area around the spa.

The structure is made of 8 cm thick self-supporting insulated foam panels. It combines a 0.6 mm pearlescent PVC inner liner with a woven PVC outer covering and a padded top edge.

Semi-rigid structure and integrated control unit

The motor unit brings together the main heating, filtration and air-bubble functions. The system features 100 air jets, including vertical bubbles directed towards the back area. The temperature can be set from 30 to 42 °C using the control panel.

The bubble function switches off automatically after 30 minutes of operation. The heating system operates together with filtration, while the bubble function cannot be used at the same time as these functions.

• Capacity 4+2 people / 6 people
• Structure Self-supporting insulated foam panels
• Insulation thickness 8 cm
• Air jets 100
• Heating 2,000 W
• Temperature range 30 to 42 °C
• Temperature increase 1.5 to 3 °C/hour
• Power supply 240 V ~ 50 Hz
• Filtration pump 40 W
• Filtration Filtration unit with 1 antibacterial cartridge included

5-piece furniture kit included

The set includes five furniture elements for creating a practical area around the spa:

• Bench Bench with backrest, seat cushions and back cushions
• Motor unit module Protective compartment for the motor unit
• Shelving unit Unit with 2 shelves
• Decking section Tread section reinforced with composite wood
• Cabinet Module with double door

Dimensions, materials and equipment

The spa has a water capacity of 1,000 litres. The inner liner is made from 0.6 mm pearlescent PVC, while the exterior is finished in woven PVC. It includes an insulated cover with a locking system, a 10 mA residual-current protected power connection, double insulation for the heater and a repair kit.

• External dimensions Ø 193 × 73 cm
• Internal dimensions Ø 165 × 73 cm
• Water capacity 1,000 litres
• Empty weight 36 kg
• Inner liner 0.6 mm pearlescent PVC
• Outer covering Woven PVC
• Cover Insulated cover with safety lock
• Electrical protection Connection with 10 mA residual-current protection
• Heater protection Double insulation
• Reference SP-OCT165

Installation and use

The structure is designed for assembly by at least one adult. It must be installed on a clean, level, water-resistant surface capable of supporting a minimum load of 500 kg/m². A drainage system must be provided for possible overflow water.

Water maintenance and storage

The panel displays the CHG FIL warning after 150 accumulated filtration hours. For routine maintenance, clean the filtration cartridge regularly and replace it every 1 to 2 months, depending on frequency and conditions of use. The water should be changed every 15 to 30 days, and the recommended pH range is 7 to 7.4.

After emptying, clean the spa with soap and water, dry the structure thoroughly and allow it to dry for 24 hours before storage. It is recommended to store it in its original packaging in a warm, dry place.