NetSpa OCTOPUS semi-rigid portable spa for 6 people

NetSpa OCTOPUS semi-rigid portable spa for 4+2 people

The NetSpa OCTOPUS is a semi-rigid portable spa designed for outdoor home use. Its octagonal design combines a self-supporting insulated foam panel structure with a pearlescent PVC inner liner and a woven PVC outer finish.

With capacity for 4+2 people and a 1,000-litre water volume, it features a motor unit that combines heating, filtration and air bubble functions. The included insulated cover has a secure fastening system to cover the spa after each use.

Semi-rigid structure and user comfort

The structure is formed by 8 cm thick self-supporting insulated foam panels, designed to retain the spa's shape once assembled. The padded upper edge provides comfortable support for the head and neck, while the woven outer covering completes its appearance.

The bubble system includes 100 air jets and features vertical bubbles directed towards the back. The massage function switches off automatically after 30 minutes of operation.

Heating, filtration and control panel

The motor unit integrates a 2,000 W electric heater, a filtration pump and an air bubble generator. The temperature can be adjusted between 30 and 42 °C. When the water temperature drops 2 °C below the selected setting, the heating system restarts automatically.

The control panel allows you to activate filtration, heating and bubble massage, adjust the temperature, choose Celsius or Fahrenheit display, and lock the controls. The system displays the CHG FIL alert after 150 cumulative filtration hours as a cartridge maintenance reminder.

• Reference SP-OCT165
• Capacity 4+2 people
• External dimensions Ø 193 x 73 cm
• Internal dimensions Ø 165 x 73 cm
• Water capacity 1,000 litres
• Empty weight 36 kg
• Structure 8 cm self-supporting insulated foam panels
• Inner liner 0.6 mm pearlescent PVC
• Outer covering Woven PVC
• Air jets 100
• Heater 2,000 W
• Filtration pump 40 W
• Power supply 240 V ~ 50 Hz
• Temperature range 30–42 °C
• Temperature increase 1.5–3 °C/hour
• Electrical protection Double-insulated heater and 10 mA RCD-protected plug
• Stated certification CE

Included equipment

The NetSpa OCTOPUS is supplied with the components required for set-up: structure with 8 foam panels and 8 foam corners, outer liner, inner liner, motor unit, insulated cover, antibacterial filter cartridge with holder, 10 mA RCD plug, caps, motor unit connectors and repair kit.

Installation and maintenance

It must be installed on a level, clean, water-resistant surface capable of supporting more than 500 kg/m². A drainage system around the spa should be provided to manage potential overflow. Before each use, check the RCD protection integrated into the plug.

For water maintenance, clean the filter cartridge regularly and replace it every 1 to 2 months, depending on the frequency and conditions of use. The water should be renewed every 15 to 30 days, with a recommended pH range of 7 to 7.4. Spa-compatible active oxygen or bromine products may be used in a floating dispenser, available separately.