Weelko OXYA WKB019 6-in-1 Hydrodermabrasion Equipment for Professional Facial Aesthetic Treatments

Weelko OXYA WKB019 6-in-1 hydrodermabrasion machine for professional facial beauty treatments

Professional CE Marking 6-in-1 Treatment room use

The Weelko WKB019 OXYA is a 6-in-1 digital beauty machine designed for daily professional facial work in a beauty salon treatment room. It combines six aesthetic technologies in one compact unit with a touch screen: hydrodermabrasion, ultrasonic peeling, electroporation, facial ultrasound, oxygen spray and hot and cold hammer. This allows one device to cover a large part of the facial treatment protocol without changing machine, simplifying the professional’s workflow and treatment room organisation.

It is intended for non-invasive aesthetic protocols for deep cleansing, cosmetic exfoliation, hydration, superficial skin renewal and skin comfort. Its interface allows the time, intensity and working mode to be adjusted in order to adapt each session to the skin type and aesthetic objective, and to carry out complete facial treatments in less time.

Functions of the 6-in-1 machine

• Hydrodermabrasion / aqua cleaning
• Ultrasonic peeling / skin scrubber
• Electroporation / poration
• Facial ultrasound
• Oxygen spray / spray water oxygen
• Hot and cold hammer

Recommended for

• Beauty salons and facial treatment rooms looking to combine several technologies in a single machine.
• Spas and wellness centres offering facial cleansing and hydration services.
• Combined protocols for deep cleansing, superficial cosmetic renewal and skin comfort.
• Professionals working with congested, dull, dehydrated skin or visible pores from an aesthetic approach.

Main features

• Multifunction facial machine for professional use.
• Digital touch screen with visual navigation by function.
• Intuitive interface for adjusting time, intensity and working mode.
• A, B, C and D containers for working solutions and recovery bottle.
• Specific handpieces for each facial technology.
• Compact format for treatment rooms and combined hygiene, renewal and cosmetic hydration protocols.

What the machine includes

• 1 main unit
• 1 hydrodermabrasion / aqua cleaning handpiece
• 1 oxygen spray handpiece
• 1 ultrasound handpiece
• 1 electroporation handpiece
• 1 hot and cold hammer handpiece
• 1 ultrasonic peeling spatula
• 1 set of suction tips
• 4 ABCD water bottles
• 1 power cable
• 1 instruction manual

Technical data

• Model WKB019
• Brand Weelko
• Type of equipment Multifunction facial beauty machine
• Functions Ultrasonic, spray water oxygen, aqua cleaning, poration, cold and hot hammer, skin scrubber
• Rated voltage AC 100-120V / AC 220-240V
• Working frequency 50/60Hz
• Output power 30W
• Size 53 x 37 x 35 cm
• Net weight 6.18 kg
• Screen Digital touch screen
• Use Professional use in beauty salons

Aesthetic applications

• Deep facial cleansing in a professional treatment room.
• Superficial cosmetic exfoliation and impurity removal.
• Support in cosmetic hydration and nourishment protocols.
• Visual improvement of skin texture and radiance.
• Aesthetic work on congested, dull skin or visible pores.
• Skin preparation for professional facial protocols.
• Skin comfort after exfoliation or intensive cleansing.

Recommended working protocol

Suggested working order for a complete facial with the WKB019. The professional adapts steps, times and intensities according to the skin type and treatment objective.

1. Pre-cleansing of the face and make-up removal.
2. Hydrodermabrasion / aqua cleaning for deep cleansing and removal of impurities.
3. Ultrasonic peeling for cosmetic exfoliation and removal of superficial keratin, with damp skin.
4. Electroporation or ultrasound to support the application of compatible water-based serums.
5. Oxygen spray for superficial hydration and a fresh sensation.
6. Cold hammer to finish the protocol with a calm and refreshed skin sensation.

Hydrodermabrasion

The hydrodermabrasion function of the Weelko WKB019 is designed for deep skin cleansing through controlled suction and work with compatible cosmetic solutions. It helps remove sebum, keratin residues and superficial impurities, while supporting the application of hydrating or conditioning solutions according to the protocol.

It is a suitable option for dehydrated skin, blackheads, uneven texture or impurity build-up, always from an aesthetic and professional approach. The working tips allow the level of comfort and type of removal to be adapted according to skin sensitivity.

Types of suction tips

• Abrasive tip or frosted head Suitable for more pronounced exfoliation. On female skin, it is recommended to limit its use to specific areas such as the T-zone, according to tolerance.
• Rigid tip or hard plastic head Suitable for general use and regular facial cleansing.
• Silicone tip Recommended for sensitive skin, as it provides gentler and more comfortable work.

System adjustment

• Water flow control.
• Vacuum or suction control.
• Bottle A, B or C selector.
• Bottle D intended exclusively for waste.

• Adjustable time 1 to 30 minutes
• Frequency · oily or combination skin Once a week
• Frequency · dry skin Once every 2 weeks
• Frequency · sensitive skin Once a month or according to professional judgement

Ultrasonic peeling

The ultrasonic spatula is designed to gently exfoliate the skin, support the removal of superficial keratin, help clear blocked pores and improve skin preparation before applying cosmetics. It must always be used on damp skin.

The spatula is used at an approximate 45-degree angle for cleansing and flat against the skin when used for cosmetic introduction manoeuvres. The machine allows different wave states to be selected according to tolerance and type of work.

Aesthetic uses

• Gentle cosmetic exfoliation.
• Helps remove dead skin cells and surface dirt.
• Support in cleansing pores and impurities.
• Skin preparation before other facial protocols.
• Cosmetic work on skin with comedones and daily residue build-up.

Wave modes

• Continuous Constant emission. Avoid keeping the spatula fixed on the same area.
• Mixed Intermediate option to adapt the work according to the skin.
• Wide pulse Suitable for skin with a thin stratum corneum and a tendency to sensitivity.

• Intensity 1 to 9 levels
• Adjustable time 1 to 30 minutes
• Vibration frequency 28,000 vibrations per second
• Recommended cleansing angle 45°

EP - Electroporation

The electroporation function, also known as poration, uses low-intensity microcurrent to support the cosmetic penetration of water-soluble actives compatible with the facial treatment. It is intended for use with water-based, alcohol-free serums, helping improve the distribution of ingredients such as hyaluronic acid, peptides, niacinamide or compatible vitamin C derivatives.

It must always be used on clean, damp skin, with sufficient conductive serum and at a comfortable intensity for the client. The head should glide slowly, without remaining fixed on the same area and avoiding sensitive or high-risk zones.

Directions for use

• Application of compatible water-based cosmetics.
• Support in cosmetic hydration and nourishment protocols.
• Improved glide and even product distribution.
• Non-invasive facial aesthetic work.

• Intensity 1 to 9 levels
• Adjustable time 1 to 30 minutes
• Approximate time for a complete facial 10 to 15 minutes
• Suggested frequency 1 to 3 times per week

Ultrasound

The facial ultrasound function is used with suitable cosmetics to reinforce the facial protocol and support the cosmetic action of the product on the skin. The handpiece must be kept moving, with continuous contact and a sufficient layer of product to facilitate glide.

The machine allows intensity and wave type to be selected in order to adapt the treatment to normal, dry, oily skin or skin with a tendency to sensitivity, always within professional aesthetic use.

Available modes

• Continuous Suitable for normal skin.
• Mixed Suitable for dry or oily skin.
• Wide pulse Recommended for fine skin or skin prone to allergy.

Aesthetic uses

• Support in the application of facial serums and creams.
• Improved glide and cosmetic work of the product.
• Aesthetic work in facial protocols for comfort, radiance and cosmetic nourishment.

• Intensity 1 to 9 levels
• Adjustable time 1 to 30 minutes
• Usual suggested time 15 minutes

Oxygen spray

The oxygen spray atomises compatible water-based solutions into fine particles for even application on the skin. It is indicated for hydration, freshness and skin comfort protocols, as well as for the application of light water-based cosmetic formulas.

The spray gun must be kept perpendicular to the skin to ensure stable spraying. It is important to respect the working distance and not to use oils, perfumes, high-alcohol solutions or viscous liquids that could block the system.

Aesthetic indications

• Immediate superficial hydration.
• Even application of water-based cosmetic liquids.
• Skin comfort on dull or dehydrated skin.
• Complementary step in complete facial protocols.

• Intensity Fixed at maximum value according to the function
• Adjustable time 1 to 30 minutes
• Approximate consumption per complete face Up to 5 ml
• Working distance 5 to 15 cm depending on the area

Hot and cold hammer

The hot and cold hammer is indicated for completing professional facial protocols before or after cosmetic application and after cleansing or exfoliation. The thermal function helps prepare the skin and support comfort during product application, while the cold function helps soothe, refresh and improve the sensation of rested skin after the treatment.

Heat mode

• Helps improve skin comfort and skin preparation.
• Used with slow movements from bottom to top and from the inside out.
• Can be used as a step before masks or serums.

Cold mode

• Helps soothe the skin and reduce the sensation of heat after treatment.
• Suitable for areas with visible pores or a tendency to temporary redness.
• Useful after deep cleansing or cosmetic exfoliation.

• Heat mode 35-42°C
• Cold mode 15-18°C
• Intensity 1 to 9 levels
• Adjustable time 1 to 30 minutes
• Total suggested daily time Do not exceed 15 minutes combining cold and heat

General directions for use

• Connect each handpiece to its corresponding outlet according to the machine identification.
• Check that the cable, power socket and machine are in good condition before use.
• Fill bottles A, B and C with compatible solutions according to the protocol. Bottle D is exclusively for waste water.
• Select the function on the touch screen and adjust time and intensity.
• Always work with constant movements and respect skin tolerance.
• Clean and dry the handpieces after each session.

Maintenance and cleaning

• Disconnect the machine before cleaning or maintenance.
• Clean the corresponding head after each use.
• For hydrodermabrasion, rinse pipes and tips to prevent blockages.
• For the spray function, purge with distilled water after finishing and leave to dry upside down.
• Carry out periodic maintenance on the piping system to prevent residue and limescale.
• Do not open the housing or carry out repairs without qualified personnel.

Precautions for use

• Do not use the machine in bathrooms, damp areas or outdoors.
• Do not use near flammable or explosive objects.
• Do not splash the main unit with water or corrosive liquids.
• Do not use deformed, scratched or damaged probes.
• Do not clean the handpieces by immersing them in water.
• Do not pull the cable to disconnect the machine.
• At the end of the working day, switch off and unplug the unit.
• Keep the device and its accessories out of the reach of children.

Contraindications and exclusions for use

• Do not use on pregnant people.
• Do not use on people with pacemakers, heart problems or metal implants in the working area.
• Do not use on sensitive skin in an active phase, with lesions, inflammation, infections or skin conditions.
• Do not use without medical authorisation on people undergoing medical treatment or diagnosis.
• For electroporation, avoid the eyes, eyelids, throat, mucous membranes, wounds, inflamed acne, moles and recent scars.
• For oxygen spray, avoid open wounds, rosacea flare-ups and active infections.
• For the hot and cold hammer, avoid eyelids, wounds, active acne flare-ups and the thyroid area.

Frequently asked questions

It adapts to normal, dry, oily or combination skin by adjusting mode, intensity, suction tip and wave type. On sensitive skin, it is recommended to work with the silicone tip and gentle modes, always according to professional judgement.

Compatible water-based cosmetic solutions, without high-alcohol content, oils or viscous formulas that could block the system. Bottle D is exclusively for waste water and must not be filled with product.

It depends on the protocol, but a facial combining several functions is usually between 30 and 60 minutes. Each technology allows the time to be adjusted from 1 to 30 minutes.

Yes. This is professional-use equipment intended for beauty salons and requires specific technical training in facial treatments.

Yes, following a coherent working order. The “Recommended working protocol” section proposes a suggested sequence that the professional adapts according to the skin and treatment objective.

The machine includes the items listed in “What the machine includes”. Working cosmetic solutions and serums are purchased separately according to each salon’s protocol.